ASTERION FTS-X series are sealed, maintenance — free front terminal lead-acid batteries. They are manufactured using AGM technology with an absorbed electrolyte. The case design is optimized for installation in 19" and 23" telecommunication cabinets and racks
Ask a Question
Specifications
| Nominal voltage, V | 12 |
| Nominal capacity, Ah | 180 |
| Design life, years | 12 |
| Technology | AGM |
| Length, mm | 546 |
| Width, mm | 125 |
| Height,mm | 323 |
| Height without terminals, mm | 317 |
| Application | Solar and wind power systems / Power supply of telecommunications equipment for mobile and fixed-line operators, Internet service providers, and backbone networks / Uninterruptible power supplies / operation in UPS and power supply installations |
| Weight, kg | 59 (±3%) |
Description
The main advantage of the FTS-X series is the increased specific capacity. The FTS-X series’ specific capacity is 15% higher than the average one, which allows to install more batteries in a fixed area. FTS-X batteries are optimal for use in both short and long discharge modes. This series demonstrates a high uniformity of quality indicators, which contributes to the extended duration of operation.
Battery construction
| Element | Positive plate | Negative plate | Case | Lid | Valve | Terminal | Separator | Electrolyte |
|---|---|---|---|---|---|---|---|
| Material | Lead dioxide | Lead | ABS | Rubber | Copper | Fiberglass | Acid |
Performance & characteristics:
- AGM technology allows to recombinate 99% of the generated gas;
- No restrictions on air transportation;
- Compliance with the UL requirements;
- Lead plates, alloyed by calcium, provide high energy density;
- Maintenance-free. Do not require distillate topping;
- Long service life;
- The battery case is made of flame-retardant ABS plastic.
Application:
- Uninterruptable power supply
- Communication and telecommunication systems
- Solar and wind power systems
- Autonomous power supply systems
- Other energy storage systems
Operating temperature range
| Discharge | -20÷60 |
|---|---|
| Charge | -10÷60 |
| Storage | -20÷60 |
| Cycle mode (2,35÷2,4 V/cell): | |
| Maximum discharge current | 1050 А |
| Temperature correction factor | 30 mV/°С |
| Standby mode (2,27÷2,3 V/cell): | |
| Temperature correction factor | 20 mV/°С |
Discharge Constant Current, A ( 20°С)
| V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
|---|---|---|---|---|---|---|---|---|---|
| 1.60V | 197 | 145 | 118 | 68,6 | 51,0 | 40,2 | 33,0 | 22,3 | 18,4 |
| 1.65V | 192 | 143 | 116 | 67,6 | 50,3 | 39,8 | 32,8 | 22,2 | 18,3 |
| 1.70V | 187 | 140 | 114 | 66,4 | 49,5 | 39,4 | 32,6 | 22,1 | 18,2 |
| 1.75V | 181 | 138 | 111 | 65,1 | 48,8 | 39,0 | 32,3 | 22,0 |
18,1 |
| 1.80V | 176 | 135 | 109 | 64,0 | 48,0 | 38,6 | 32,1 |
21,9 |
18,1 |
Discharge Constant Power, W/cell ( 20°С)
| V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
|---|---|---|---|---|---|---|---|---|---|
| 1.60V | 360 | 274 | 225 | 132 | 98,0 | 77,6 | 64,1 | 44,1 | 36,3 |
| 1.65V | 349 | 268 | 221 | 130 |
97,0 |
76,9 |
63,6 | 43,8 | 36,1 |
| 1.70V | 339 | 262 | 217 | 128 | 96,0 | 76,3 | 63,1 | 43,4 | 35,8 |
| 1.75V | 328 | 257 | 212 | 126 | 95,0 |
75,5 |
62,5 |
43,3 | 35,7 |
| 1.80V | 318 | 251 | 208 | 124 | 94,0 | 74,8 | 62,0 | 43,1 | 35,7 |