ASTERION FTS-X series are sealed, maintenance — free front terminal lead-acid batteries. They are manufactured using AGM technology with an absorbed electrolyte. The case design is optimized for installation in 19" and 23" telecommunication cabinets and racks
Ask a Question
Specifications
| Nominal voltage, V | 12 |
| Nominal capacity, Ah | 150 |
| Design life, years | 12 |
| Technology | AGM |
| Length, mm | 548 |
| Width, mm | 105 |
| Height,mm | 316 |
| Height without terminals, mm | 316 |
| Application | Solar and wind power systems / Power supply of telecommunications equipment for mobile and fixed-line operators, Internet service providers, and backbone networks / Uninterruptible power supplies / operation in UPS and power supply installations |
| Weight, kg | 49,8 (±3%) |
Description
The main advantage of the FTS-X series is the increased specific capacity. The FTS-X series’ specific capacity is 15% higher than the average one, which allows to install more batteries in a fixed area. FTS-X batteries are optimal for use in both short and long discharge modes. This series demonstrates a high uniformity of quality indicators, which contributes to the extended duration of operation.
Battery construction
| Element | Positive plate | Negative plate | Case | Lid | Valve | Terminal | Separator | Electrolyte |
|---|---|---|---|---|---|---|---|
| Material | Lead dioxide | Lead | ABS | Rubber | Copper | Fiberglass | Acid |
Performance & characteristics:
- AGM technology allows to recombinate 99% of the generated gas;
- No restrictions on air transportation;
- Compliance with the UL requirements;
- Lead plates, alloyed by calcium, provide high energy density;
- Maintenance-free. Do not require distillate topping;
- Long service life;
- The battery case is made of flame-retardant ABS plastic.
Application:
- Uninterruptable power supply
- Communication and telecommunication systems
- Solar and wind power systems
- Autonomous power supply systems
- Other energy storage systems
Operating temperature range
| Discharge | -20÷60 |
|---|---|
| Charge | -10÷60 |
| Storage | -20÷60 |
| Cycle mode (2,35÷2,4 V/cell): | |
| Maximum discharge current | 1050 А |
| Temperature correction factor | 30 mV/°С |
| Standby mode (2,27÷2,3 V/cell): | |
| Temperature correction factor | 20 mV/°С |
Discharge Constant Current, A ( 20°С)
| V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
|---|---|---|---|---|---|---|---|---|---|
| 1.60V | 178 | 137 | 111 | 63,8 | 47,1 | 37,1 | 30,2 | 19,1 | 15,4 |
| 1.65V | 171 | 133 | 109 | 62,7 | 46,2 | 36,3 | 29,6 | 19,0 | 15,3 |
| 1.70V | 164 | 129 | 106 | 61,3 | 45,3 | 35,6 | 29,0 | 18,8 | 15,2 |
| 1.75V | 157 | 125 | 103 | 59,9 | 44,4 | 34,8 | 28,4 | 18,6 |
15,1 |
| 1.80V | 149 | 120 | 99,9 | 58,4 | 43,4 | 34,0 | 27,8 |
18,3 |
15,0 |
Discharge Constant Power, W/cell ( 20°С)
| V/cell | 30 min | 45 min | 1 h | 2 h | 3 h | 4 h | 5 h | 8 h | 10 h |
|---|---|---|---|---|---|---|---|---|---|
| 1.60V | 298 | 230 | 190 | 116 | 88,1 | 70,4 | 57,6 | 36,8 | 29,6 |
| 1.65V | 292 | 227 | 188 | 114 |
87,2 |
69,7 |
57,1 | 36,5 | 29,4 |
| 1.70V | 286 | 223 | 186 | 113 | 86,3 | 69,0 | 56,5 | 36,2 | 29,2 |
| 1.75V | 280 | 219 | 184 | 112 | 85,3 |
68,2 |
55,9 |
35,9 | 29,0 |
| 1.80V | 273 | 215 | 181 | 110 | 84,3 | 67,4 | 55,3 | 35,7 | 28,8 |